Reusable Christmas Cracker

Fill a reusable cracker-shaped container with a small surprise, without a snap.

One solid body, no colors. Works with every slicer.

No printer?

Printaro can print this design for you. Copy the link to your design and paste it in your message, so we know exactly which settings you chose.

Copy link and request a print

Keep the tools free

Found this useful?

These generators are free to use. If one saved you time, a small Ko-fi donation helps pay for hosting, rendering and new tools.

Support on Ko-fi

About this generator

Crackers usually end up in the bin. This one is a container: pull an end off, find the surprise, push it back on. It doesn't snap or bang and there is no place for a snap strip.

How to use

Set the length and the inside diameter; the inside is the room for the surprise.
Choose the end style and type a word or name for the tube.
Print the tube and the two ends standing up, as exported. The 3MF has the lettering as a separate color.
Put the surprise inside and push both ends into the tube until they rest on its rim.

Printing tips

The ends hold with three thin ribs. If they are too tight, raise Fit clearance or lower Rib grip; if they fall out, do the opposite.
Switch Show to Assembled to see the cracker in one piece.