Modular Christmas Wreath

Connect printed segments into a wreath sized for your display.

One solid body, no colors. Works with every slicer.

Presets

Wreath

Show

Assembled only changes the preview. Downloads always contain the print layout: every piece apart, in the position it prints in.

Outside diameter

Segments

Relief

Berries

Bow

Print plates

Print bed size

The wreath is split over as many plates of this size as needed. Use the smaller side of your printer's bed.

Download

All plates puts every plate side by side, too big for one bed. Pick Plate 1, 2, … to download one plate at a time; the preview shows that plate. A plate number above the plate count gives a message.

Colors

Wreath

Berries

Bow

Advanced

Fit clearance

Gap in the dovetail joints.

No printer?

Printaro can print this design for you. Copy the link to your design and paste it in your message, so we know exactly which settings you chose.

Copy link and request a print

Keep the tools free

Found this useful?

These generators are free to use. If one saved you time, a small Ko-fi donation helps pay for hosting, rendering and new tools.

Support on Ko-fi

About this generator

A wreath is usually too big for a printer. This one is made of arc segments: each has a dovetail tongue at one end and a matching socket at the other, and together they close into an exact ring. One segment has the hanging loop, the one opposite holds the bow.

How to use

Set the outside diameter and the number of segments, and set Print bed size to your printer. The segments and the bow are packed onto as many plates of that size as needed; a segment that is longer than the bed gives a message.
Choose holly or pine relief, and turn berries and the bow on or off.
Download Plate 1, Plate 2, … one at a time and print each plate flat. In the 3MF the berries are a separate color on their segments; keep them together with their segment in the slicer.
Lay the segments in a ring and slide each tongue down into the next socket. Push the bow's peg into the hole of the bottom segment and hang the wreath by the loop.

Printing tips

If the dovetails are tight, raise Fit clearance; if the ring is loose, lower it or add a drop of glue.
More segments mean smaller pieces for a small bed.

Helpful guides

Frequently asked questions

How big can it get?

Up to 300 mm across. At 300 mm with 8 or more segments every piece fits a 150 mm bed. All plates side by side is too big for one bed: download one plate at a time.

Do the joints hold the wreath when it hangs?

The dovetails lock the segments in the ring; they slide apart only straight up or down. How firm the fit is depends on your printer; glue makes it permanent.