Slinky Ghost
A ghost with a spiral body that stretches and bounces
No printer?
Printaro can print this design for you. Copy the link to your design and paste it in your message, so we know exactly which settings you chose.
Keep the tools free
Found this useful?
These generators are free to use. If one saved you time, a small Ko-fi donation helps pay for hosting, rendering and new tools.
About this generator
A bouncy ghost to hang from a lamp or a door frame. Pull it gently and let go.
How to use
- Set the size and the number of turns.
- Print standing, no supports.
- Pull the turns loose gently if any stuck together, then hang it by the loop.
Printing tips
- PLA or PETG, 2 walls, 0.2 mm layers. Slow down for the outer wall.
- If turns stick, lower the flow slightly or print a little cooler.
- Glow-in-the-dark filament is fun for this one.
Helpful guides
Frequently asked questions
The turns are stuck together.
Twist the head and the hem in opposite directions to break them free. Next time print a bit cooler or slower.
How far does it stretch?
About twice its body height with 8 turns. More turns stretch further.
