Cauldron Candy Bucket
A trick-or-treat bucket shaped like a cauldron
One solid body, no colors. Works with every slicer.
No printer?
Printaro can print this design for you. Copy the link to your design and paste it in your message, so we know exactly which settings you chose.
Keep the tools free
Found this useful?
These generators are free to use. If one saved you time, a small Ko-fi donation helps pay for hosting, rendering and new tools.
About this generator
A cauldron with your child's name on it, ready for the trick-or-treat round.
How to use
- Type the name and set the size.
- Print the bucket standing and the handle flat.
- Slide the handle's legs into the slots in the lugs. A drop of glue makes it permanent.
Printing tips
- PETG is tougher than PLA for a bucket that gets swung around.
- Use 3 walls and 15 % infill for the handle.
- With one extruder the name is one color with the bucket; use the 3MF for a two-color name.
Helpful guides
Frequently asked questions
How much can it carry?
Plenty of sweets. It is not a toy for lifting heavy things; the handle is 10 by 4 mm.
The bucket and handle don't fit on my bed together.
Set Print to Bucket only, then to Handle only, and print them separately.
