Articulated Snake
Print-in-place wiggly snake with a name
One solid body, no colors. Works with every slicer.
No printer?
Printaro can print this design for you. Copy the link to your design and paste it in your message, so we know exactly which settings you chose.
Keep the tools free
Found this useful?
These generators are free to use. If one saved you time, a small Ko-fi donation helps pay for hosting, rendering and new tools.
About this generator
A fidget toy and a name tag in one: the snake prints in place and wiggles straight off the bed.
How to use
- Type a name (one letter per segment, counted back from the head).
- Pick the length and width.
- Print flat as exported, then flex each joint gently to free it.
Printing tips
- If joints are stuck, raise the clearance by 0.05 mm.
- Matte PLA and 0.2 mm layers work well.
Helpful guides
Frequently asked questions
Do I need to assemble it?
No. It prints in place: the segments come off the bed already connected and turn left and right.
The joints are stuck.
Bend each joint gently to break it loose. If they stay stuck, raise Joint clearance by 0.05 mm for the next print.
