Hinged Box
Boxes with a print-in-place hinged lid
One solid body, no colors. Works with every slicer.
No printer?
Printaro can print this design for you. Copy the link to your design and paste it in your message, so we know exactly which settings you chose.
Keep the tools free
Found this useful?
These generators are free to use. If one saved you time, a small Ko-fi donation helps pay for hosting, rendering and new tools.
About this generator
A one-piece box with a real hinge: nothing to assemble, no screws, no glue.
How to use
- Set the inside size of the box and the lid.
- Print as exported, both halves open side up.
- Flex the hinge gently to free it, then fold the lid over until the clasp clicks.
Printing tips
- Use a brim only on the outer edges, never across the hinge.
- PETG makes the clasp last longer than PLA.
- For two colors, use the 3MF: the box and lid are separate objects.
Helpful guides
Frequently asked questions
Do I need to assemble the hinge?
No. The hinge prints in place: the box and lid come off the bed already connected. Don't put a brim across the hinge.
The hinge is stuck after printing.
Gently bend the lid back and forth a few times to free it. If it stays stuck, raise Hinge clearance by 0.05–0.1 mm for the next print.
