Threaded Container
Round boxes with a screw-on lid
One solid body, no colors. Works with every slicer.
No printer?
Printaro can print this design for you. Copy the link to your design and paste it in your message, so we know exactly which settings you chose.
Keep the tools free
Found this useful?
These generators are free to use. If one saved you time, a small Ko-fi donation helps pay for hosting, rendering and new tools.
About this generator
Small parts, pills, spices or SD cards: a screw-top container keeps them in and dust out.
How to use
- Set the inside diameter and height.
- Pick a thread pitch (3 mm suits most sizes).
- Print the body upright and the lid as exported.
Printing tips
- Print the thread with 0.2 mm layers or finer.
- PETG threads run smoother than PLA.
- If the lid is stiff, raise the clearance by 0.1 mm.
Helpful guides
Frequently asked questions
Which thread pitch should I use?
2–3 mm for small containers, 4–5 mm for big ones. Bigger pitches close faster.
The lid is hard to turn.
Raise Thread clearance by 0.1 mm and print again. PETG threads also run smoother than PLA.
