PCB Standoff
Standoffs for circuit boards, M2 to M4
No printer?
Printaro can print this design for you. Copy the link to your design and paste it in your message, so we know exactly which settings you chose.
Keep the tools free
Found this useful?
These generators are free to use. If one saved you time, a small Ko-fi donation helps pay for hosting, rendering and new tools.
About this generator
Mount a Raspberry Pi, Arduino or any board: choose the screw size and height, and print as many as you need.
How to use
- Choose the screw size and height.
- Tapped holes let the screw cut its own thread.
- Print a set in one go.
Printing tips
- Print slowly for accurate small holes.
- For tapped holes, drive the screw in once before mounting the board.
Helpful guides
Frequently asked questions
Tap or clearance hole?
With Tap, the screw cuts its own thread into the plastic. With Clearance, the screw passes through and you use a nut.
The screw is hard to drive in.
Drive it in once before mounting the board. Printing slowly also makes small holes more accurate.
