Cold Shoe Adapter
Shoe feet, covers and 1/4" shoes
No printer?
Printaro can print this design for you. Copy the link to your design and paste it in your message, so we know exactly which settings you chose.
Keep the tools free
Found this useful?
These generators are free to use. If one saved you time, a small Ko-fi donation helps pay for hosting, rendering and new tools.
About this generator
Mount a mic, light or action camera on a camera shoe, protect hot-shoe contacts, or add a shoe to a cage.
How to use
- Pick the part.
- Print the feet standing on the foot plate, the shoe flat.
- Foot to 1/4": slide a 1/4"-20 nut into the side slot. Shoe: fix it with a countersunk 1/4"-20 screw.
Printing tips
- PETG or nylon are tougher than PLA for feet that slide in and out.
- Sizes follow ISO 518: 18 mm foot, 18.6 mm shoe.
Helpful guides
Frequently asked questions
What does each part do?
Quarter: a shoe foot with a 1/4"-20 nut for lights and mics. GoPro: a shoe foot with a GoPro mount. Cover: protects an empty hot shoe. Shoe: a cold shoe that bolts onto any 1/4"-20 screw.
The foot is too tight or loose in the shoe.
Change Foot clearance by 0.05 mm. Sizes follow ISO 518: an 18 mm foot in an 18.6 mm shoe.
