Hose Adapter
Connect hoses and pipes of any two sizes
No printer?
Printaro can print this design for you. Copy the link to your design and paste it in your message, so we know exactly which settings you chose.
Keep the tools free
Found this useful?
These generators are free to use. If one saved you time, a small Ko-fi donation helps pay for hosting, rendering and new tools.
About this generator
Connect a 35 mm vacuum hose to a 25 mm dust port, or an aquarium tube to a pump. Enter both diameters and print.
How to use
- Enter the diameter of each end. Use the inside diameter of the hose that slides over it.
- Set the length of each end.
- Turn barbs on for soft hoses.
Printing tips
- Prints standing up, larger end down, with no supports.
- Use 3+ walls and PETG for watertight connections.
Helpful guides
Frequently asked questions
Which diameter should I enter?
Each end slides into a hose, so enter the inside diameter of that hose (or slightly more for a tight fit).
Will it be watertight?
Use PETG and 3 or more walls, and keep the barbs on. A hose clamp over each end helps for pressure.
