Dust Extraction Adapter
Connect power tools to your vacuum
No printer?
Printaro can print this design for you. Copy the link to your design and paste it in your message, so we know exactly which settings you chose.
Keep the tools free
Found this useful?
These generators are free to use. If one saved you time, a small Ko-fi donation helps pay for hosting, rendering and new tools.
About this generator
Every tool brand has a different dust port. Measure the port and the hose and print an adapter that fits both.
How to use
- Measure the tool's port (outside if the adapter goes over it, inside if it goes into it).
- Do the same for the hose.
- Print it; the wider end is placed on the bed automatically.
Printing tips
- The ends taper slightly: push firmly for an airtight fit.
- PETG survives the bumps of workshop use better than PLA.
Helpful guides
Frequently asked questions
Which diameter should I measure?
If the adapter slides over the port, measure the port's outside. If it slides into the port, measure the inside.
How do I get an airtight fit?
The ends taper slightly, so push them on firmly. If it's still loose, lower Clearance by 0.1 mm.
