Cable Clip
Generate clips for any cable diameter
No printer?
Printaro can print this design for you. Copy the link to your design and paste it in your message, so we know exactly which settings you chose.
Keep the tools free
Found this useful?
These generators are free to use. If one saved you time, a small Ko-fi donation helps pay for hosting, rendering and new tools.
About this generator
Measure your cable with calipers, enter the diameter and get a clip that snaps on securely. Add more cables to route several wires side by side.
How to use
- Measure the cable diameter and enter it.
- Choose how many cables the clip holds.
- Pick screw holes or a flat back for double-sided tape.
- Generate the STL and print it lying on its side, as exported.
Printing tips
- Print the clip as exported (on its side) so the snap arms bend along the layers instead of breaking.
- PETG is tougher than PLA for clips that are opened often.
Helpful guides
Part of a project
- Tidy the cables on your desk: Clips, channels and labels that get cables off the floor and out of sight.
Frequently asked questions
The clip is too tight or too loose. What should I change?
Increase the snap opening for an easier fit or decrease it for a firmer hold. The clearance setting adds play around the cable.
Screw or adhesive?
Screws hold best on wood. Use adhesive on walls, desks and furniture where you don't want holes: strong double-sided tape such as VHB works well.
