Angle Bracket
L-brackets with screw holes and gussets
No printer?
Printaro can print this design for you. Copy the link to your design and paste it in your message, so we know exactly which settings you chose.
Keep the tools free
Found this useful?
These generators are free to use. If one saved you time, a small Ko-fi donation helps pay for hosting, rendering and new tools.
About this generator
Join two boards at 90°, hold a small shelf or reinforce a frame. Set the leg lengths and screws, and add gussets for stiffness.
How to use
- Set both leg lengths, the width and the thickness.
- Choose how many screw holes per leg and their size.
- Turn on gussets for heavier loads.
Printing tips
- Use 100% infill or 5+ walls for load-bearing brackets.
- PETG handles sustained load better than PLA.
Helpful guides
Frequently asked questions
How strong is it?
Strong enough for small shelves and frames. For heavy loads, use metal brackets.
Which screws fit?
Set Hole diameter about 0.5 mm larger than the screw: 4.5 mm suits 4 mm screws. Turn on Countersunk for flat-head screws.
