Yo-Yo
Two-color yo-yo with a bolt or printed axle
One solid body, no colors. Works with every slicer.
No printer?
Printaro can print this design for you. Copy the link to your design and paste it in your message, so we know exactly which settings you chose.
Keep the tools free
Found this useful?
These generators are free to use. If one saved you time, a small Ko-fi donation helps pay for hosting, rendering and new tools.
About this generator
A classic toy in your colors. The bolted version can be opened to change the string.
How to use
- Pick size, gap and axle.
- Print both halves outer face down.
- Bolt: push the nut into its trap, put an M5 x 20-25 mm bolt through both halves and tighten until the gap is even. Printed pin: press the pin into both halves.
Printing tips
- Print the halves with 100 % infill or many walls: weight at the rim makes it spin longer.
- Use cotton yo-yo string; tie a slip knot around your finger.
Helpful guides
Frequently asked questions
What do I need besides the print?
An M5 bolt and nut, or choose the printed axle. And cotton yo-yo string.
How do I make it spin longer?
Print the halves with 100% infill or many walls: more weight at the rim means a longer spin.
