Paper Towel Holder
Brackets for a dowel rod, wall or under a cabinet
No printer?
Printaro can print this design for you. Copy the link to your design and paste it in your message, so we know exactly which settings you chose.
Keep the tools free
Found this useful?
These generators are free to use. If one saved you time, a small Ko-fi donation helps pay for hosting, rendering and new tools.
About this generator
Hang kitchen roll on the wall or under a cabinet with two printed brackets and a dowel from the hardware store.
How to use
- Pick wall or under-cabinet and your rod diameter.
- Print both brackets with the screw plate on the bed.
- Screw up the socket bracket, slide the rod in, screw up the slot bracket at the right distance. New rolls drop in through the slot.
Printing tips
- Cut the rod to the roll width plus about 20 mm.
- PETG or PLA; 4 walls make the arm stiff.
Helpful guides
Frequently asked questions
How long should the rod be?
The width of the roll plus about 20 mm. Use a wooden dowel or a tube of the diameter you set.
How do I change the roll?
One bracket has a slot: lift the rod out on that side, slide on a new roll and drop it back in.
