Neon Name Sign

A name in neon-style tubes with a glow, on a dark backing

A name sign that looks like a neon light. The letters are drawn as bright tubes, a band of glow color runs around them and everything sits on a dark backing that follows the letters or forms a plate. A small second line and a swoosh underline are optional. It does not light up by itself: the look comes from the colors.

Free to download. A short ad may play before your file.

One solid body, no colors. Works with every slicer.

Presets
Text
mm
mm
Neon style
mm
mm
Size and backing
mm
mm
mm
mm
Colors

Keep the tools free

Found this useful?

These generators are free to use. If one saved you time, a small Ko-fi donation helps pay for hosting, rendering and new tools.

Support on Ko-fi

About this generator

A wall sign with your name in neon-style tube letters, a glow around them and an optional second line and underline. Three colors in one 3MF, key holes in the back.

How to use

  1. Type the name and pick a font. Script fonts look most like real neon.
  2. Choose tube letters (an outline) or solid letters, and the tube width.
  3. Add a second line or an underline if you like, and pick the backing shape.
  4. Download the 3MF for all three colors, or the STL.

Printing tips

  • Print with the back on the bed. No supports: the key holes in the back bridge over.
  • Translucent or silk filament for the tubes and the glow makes the sign look lit, especially with a light behind or above it.
  • On a one-color printer, pause at the top of the backing and swap to the glow color, then again at the top of the glow for the tubes.
  • Very thin script letters print best with Solid letters instead of tubes.

Helpful guides

Frequently asked questions

Does it light up?

No, there are no LEDs inside. The neon look comes from the colors. A LED strip on the wall behind the sign gives a soft glow around it.

How do I hang it?

Measure the distance between the two key holes in the back of the print and put two screws in the wall at that distance, with the heads (up to 8 mm wide) sticking out about 2 mm. Hold the sign over them and slide it down.

Can I sell prints I make with this?

Yes, you may sell prints you make with this tool.