Controller Stand

A desk stand for one or two game controllers with your gamer tag

A stand for the controllers on your desk. Each controller stands on its two grips, which drop into pockets behind the front plate, and its back leans on a backrest. You set the distance between the grips, the size of the pockets and the tilt, so it fits most controllers with two grips. Your gamer tag and an optional striped sun or star sit raised on the front.

Free to download. A short ad may play before your file.

One solid body, no colors. Works with every slicer.

Presets
Fit
mm
mm
mm
mm
mm
°
mm
Tag
mm
mm
Colors

Keep the tools free

Found this useful?

These generators are free to use. If one saved you time, a small Ko-fi donation helps pay for hosting, rendering and new tools.

Support on Ko-fi

About this generator

A stand that holds one or two game controllers upright on their grips, leaning on a tilted backrest, with your gamer tag and a retro sun emblem raised on the front. Fits most two-grip controllers.

How to use

  1. Measure your controller: the distance between the middle of the two grips, and how wide and how thick a grip is near its end.
  2. Set the grip distance, the pocket width and the slot depth from those numbers, plus 2 to 3 mm of room.
  3. Choose one or two controllers, the tilt and the backrest height.
  4. Type your gamer tag, pick a font and an emblem, then download.

Printing tips

  • Print it as it is, standing on the base. No supports: the backrest leans back at most 25 degrees.
  • The tag and emblem are raised on the front face. With a multi-color printer they print in their own colors; on one color they still show in relief.
  • PLA or PETG both work. Three walls and 15 % infill are plenty. The bars across the sun window are short bridges.
  • Try the fit before a long print: print it with one controller and a low backrest first.

Helpful guides

Frequently asked questions

Which controllers fit?

Most controllers that have two grips. The default fits a large controller with grips about 110 mm apart. Measure yours and change the grip distance, pocket width and slot depth to match. Controllers without grips need a different holder.

Can I leave the tag empty?

Yes. The front plate is then plain, or shows only the emblem.

Can I sell prints I make with this?

Yes, you may sell prints you make with this tool.