Name Piggy Bank

A money box with a name, a coin slot and a screw cap

A first money box with the baby's name around the belly. Coins go in through the slot on top, and the cap in the bottom screws out to empty it, so nothing has to break. Choose a pig, an elephant or a bear.

Free to download. A short ad may play before your file.

One solid body, no colors. Works with every slicer.

Presets
Name
Shape
mm
Colors
Advanced
mm

32 mm takes every euro coin, including 2 euro (25.75 mm).

mm
mm

More if the cap is too tight, less if it is loose.

Keep the tools free

Found this useful?

These generators are free to use. If one saved you time, a small Ko-fi donation helps pay for hosting, rendering and new tools.

Support on Ko-fi

About this generator

A standing piggy bank shaped like an egg, as a pig, elephant or bear, with the name around the belly, a coin slot on top that takes every euro coin and a screw cap in the bottom to get the money out. Prints upright without supports. Multi-color 3MF.

How to use

  1. Type the name and choose the animal.
  2. Set the height; the name shrinks to fit the belly.
  3. Pick the colors, or use one filament for everything.
  4. Download the 3MF, print the body upright and the cap flat.

Printing tips

  • Print the body standing up, no supports. Use at least 3 walls.
  • The ears and snout are their own color: download the 3MF to keep them apart.
  • Turn the cap with a coin in the groove underneath.

Helpful guides

Frequently asked questions

How do I get the money out?

Turn the cap in the bottom a few turns to the left with a coin and pull it out.

Can I sell what I print with this?

Yes, you may sell prints you make with this tool.

Is this safe for a baby to play with?

No. It is a decoration, not a toy: keep it out of the crib and away from little mouths, because printed parts can break into small pieces.